Bykski I-GNA770-X water block on an Intel Arc A770 LE 16GB (FurMark Stress Test)
I previously ran FurMark on a stock Intel Arc A770 LE 16GB with the fan speed at 100% and temperatures reached 74c during a 9 minute FurkMark stress test. I decided to buy a GPU water block (Bykski I-GNA770-X) and this is another 9 minute FurMark stress test with the water block.
For my previous video see https://youtu.be/vJxJxUe0xnM
Ambient temp ~20c. Pump set to ~2000 RPM. All 6x Akasa SOHO AR fans set to max RPM.
0:00 - Intro
0:10 - Stress Test Start
9:10 - Cool down
Results
GPU Max temp 42c
GPU Max Memory temp 38c
System setup
CPU: AMD Ryzen 5 5600G
Motherboard: MSI MAG X570S TORPEDO MAX
Memory: 32 GB @ 2x16 GB DDR4-3600
Kingston KF3600C16D4/16GX
GPU: Intel(R) Arc(TM) A770 Graphics
PSU: Corsair RM850
Radiator 1: Bykski 360mm x40mm RC Series (CR-RD360RC-TK-V2)
with 3x Akasa SOHO AR 120mm Fans (AK-FN108)
Radiator 2: Bykski 360mm x40mm RC Series (CR-RD360RC-TK-V2)
with 3x Akasa SOHO AR 120mm Fans (AK-FN108)
Pump: Bykski D5 / 100mm PMMA Reservoir (CP-NWD5-X-CT60-V3-100)
CPU Block: Bykski CPU-XPR-C-M
GPU Block: Bykski I-GNA770-X
Case: Antec Performance 1 FT
Loop setup / Preparation
Pump flows to [1] GPU block, to [2] Front Radiator, to [3] CPU block, to [4] Top Radiator, to [5] Pump Return.
3x front radiator (GPU) fans blow into the case, 3x top radiator (CPU ) fans extract from the case.
Filled with distilled water, used to test for leaks for 24 hours, then drained.
EK-CryoFuel Loop cleaner was used for 8 hours, then drained.
EK-CryoFuel Superflush used for 15 mins, then drained.
EK-CryoFuel Superflush used for 24 hours, then drained.
EK-CryoFuel Mystic Fog Premix used as coolant - 22/09/2023
OBS
Desktop Resoultion 3840x2560
Recording at 2560x1440
Intel QSV AV1